ILVE Professional Plus Gas Hob with Cast Iron Grids, 1200x650 mm

A gas hob designed for continuous service in professional kitchens, where precise heat control and durability underpin every service. Gas burners generate an open flame that responds instantly to the chef's adjustment, eliminating the lag of electric elements. The flame transfers heat directly to the pan base, allowing rapid temperature changes and even distribution across the cooking surface. This direct method suits high-volume cooking where timing and consistency are critical, from searing to simmering across multiple pans at once.

The sequence begins by placing a pan on the cast iron grid over the chosen burner. Integrated electric ignition removes the need for a separate lighter; a turn of the knob produces a spark that lights the gas. The flame is infinitely adjustable, letting the operator move from a rolling boil to a gentle simmer without removing the pan. A safety valve cuts the gas supply if the flame is extinguished, preventing unburned gas from accumulating. Each burner is sized and powered for a specific role: small burners for delicate sauces, large burners for stockpots, and double crown or dual burners for rapid heating of wide-based pans.

Construction centres on sturdy cast iron grids that support heavy pans without warping. Burner caps are brass, chosen for its thermal conductivity and resistance to corrosion, and are coated with a non-stick nanotechnological treatment that repels food residue and simplifies cleaning. The hob measures 1200 mm across the worktop and 650 mm front to back, providing space for multiple pans while fitting within a standard kitchen run.

Controls are knobs, one per burner, that set the gas flow and therefore the flame height. The integrated ignition system is activated by pressing and turning the knob, producing a spark at the burner head. The safety valve is automatic, requiring no operator intervention beyond ensuring the flame is lit.

The power ratings—ranging from 0.3 kW to 5 kW—indicate the load each burner places on the gas supply. A 5 kW burner demands a high-capacity gas line and adequate ventilation, while the smallest 0.3 kW simmer burner allows low-temperature holding without scorching. The footprint of 1200x650 mm dictates the space the hob occupies on the worktop, requiring a clear run of that size plus additional clearance for ventilation and pan handles.

Cleaning follows from the materials: cast iron grids can be lifted off and scrubbed, while the brass burner caps with their non-stick treatment are wiped down after cooling. The safety valve and ignition system have no user-serviceable parts and are maintained by a gas-safe engineer during routine service.

The hob is offered in a single configuration, with the specified burner sizes and power ratings. No variants or additional modules are listed for this article.